Full Compliment Ceramic ball bearings
- Description:
Full ceramic bearing of full complement balls has an add-balls gap on its side.
- Contact Now
-
- Description
- Product list
- Our Services
- FAQ
-
Product Description
full complement ceramic ball bearing
1.no cage, installing more ceramic balls
2.avoiding the material limitation
full complement ceramic ball bearing
Full ceramic bearing of full complement balls has an add-balls gap on its side. Because using no cage design, the bearing is able to installmore ceramic balls than the standard construction,so the heavier radial load ability increase more. In addition, to avoid the limited of the
cage material, this bearing same as the full ceramic bearing of ceramic cage has corrosion resistance and high temperature application.
This series of bearing is not for high speed choice ,it should be to install on the unforced side. As there have in the inner and out rings
the bearing could not be used in axial load application.
Advantages of Ceramic Bearings
(1)essentially increased life time
(2)high stiffness because of high Young’s modulus,lower vibration
(3)wear resistance and cost effective lubrication
(4)electrical insulation and non-magnetism
(5)high temperature resistance up to 1000oC
(6)high corrosion resistance to most acids and alkalies
bearing series
6000,6200,6300,R ,1600,6800,6900,51100,51200,51300,51400
Ceramic bearing material
Si3N4 / ZrO2 / SiC/Al2o3
cage material
PEEK/PTFE/PFA/graphite reinforcing PTFE
MOQ:
1 piece
Payment terms
L/C D/A D/P T/T western Union MoneyGram Paypal
Port
Shanghai Ningbo Dalian Tianjin Qingdao
-
-
Our Services
1. Full technical support from concept design to final product delivery
2. On-time delivery with no compromise on quality
3. High-quality product making with advanced equipment and techniques
4. Large-scale of proudction availabl
5. Lower cost (medium-size factory, 3000 square meters), but high-end quality only(the
same quality control system as per big factory)6. Any questions to be sent will get response within 24 hours FAQ
-
FAQ
a) How to prolong service life of bearings?
Accurate installation and using,alignment,timely monitor,re lubrication etc.
b) Reason for bearings failure?
Usually is incorrect using method,pollution,improper use of lubricant,damage happened
in installation and handing,also including installation error.according to the traces can
know the reason why is failure.c) How to choose bearings?
Analyse mechanical device and use conditions.clear the requiremment of
bearings.select type of bearings,select distribution way of bearings.selet dimensions of
bearings,select installation method of bearings.d) When select bearings specifications,what you need to consider?
The precision of the bearings(rotating precision,dimensional tolerances)internal
clearance and preload bearing material and heat treatment.structure of cage and material.e) Payment method,packing way,transport method,time of delivery? T/T,PAYPAL,WESTERN UNION,L/C Tube,box,carton,pallet, By sea,by air 3-15days after receipt of payment.
