Ceramic Ball
  • ceramic inert balls
  • ceramic inert balls
  • ceramic inert balls
  • ceramic inert balls
  • ceramic inert balls
  • ceramic inert balls
  • ceramic inert balls
  • ceramic inert balls

ceramic inert balls

  • Description:
  • Silicon nitride is a chemical compound of silicon and nitrogen.

  • Contact Now
  • Facebook Twitter Google+ LinkedIn Email Addthis
  • Description
  • Product list
  • Our Services
  • FAQ
  • Product Description:

    Silicon nitride is a chemical compound of silicon and nitrogen. It is a hard ceramic having high strength over a broad temperature range, moderate thermal conductivity, low coefficient of thermal expansion, moderately high elastic modulus, and unusually high fracture toughness for a ceramic. This combination of properties leads to excellent thermal shock resistance, ability to withstand high structural loads to high temperature, and superior wear resistance.

    Classification:
    Rough   Ball: the size is 2-40MM
    Grinding  Ball:the size is 1.5-40MM
    Bearing   Ball: the size is 0.4-60MM

    Features:
    1.Excellent corrosion resistance withstands attack from harsh chemicals and demanding environmental conditions.
    2.Lightweight Silicon Nitride weighs 60% less than steel which reduces centrifugal force, skidding and wear under high speed and acceleration.
    3.Superior Surface Finish, Ra 0.1 7-0.25 micro inches may extend L-10 life to as much as 10 times that of steel bearings.
    4.High Temperature Hardness is twice that of steel. These all-ceramic balls retain their strength and hardness up to 1800 degrees F.
    5.Silicon Nitride is further characterized by its low density of 3.2 g/cc, high flexural strength of 1.0 GPa, and fracture toughness of 6 MPa/M2.

    表1 球等级和球规值   Balls Grade or Ball Gauge

    单位为微米(微英寸)Unit is mironmeter(microinch)

    球等级

    Grade

    批直径变动量

    VDwL

    max

    规值间距

    Gauge Gap

    优先规值

    Priority Gauge

    分规值间距

    Subgauge Gap

    分规值ball subgauge

    G2

    0.08(3)

    0.5

    -5,…,-0.5,   0,   +0.5,…,+5

    0.1

    -0.2, -0.1,  0,  +0.1, +0.2

    G3

    0.13(5)

    0.5

    -5,…,-0.5,   0,   +0.5,…,+5

    0.1

    -0.2, -0.1,  0,  +0.1, +0.2

    G5

    0.25(10)

    1

    -5,…,-1,    0,   +1,…,+5

    0.2

    -0.4, -0.2,  0,  +0.2, +0.4

    G10

    0.5(20)

    1

    -9,…,-1,    0,   +1,…,+9

    0.2

    -0.4, -0.2,  0,  +0.2, +0.4

    G16

    0.8(32)

    2

    -10,…,-2,    0,   +2,…,+10

    0.4

    -0.8, -0.4,  0,  +0.4, +0.8

    G20

    1.0(40)

    2

    -10,…,-2,    0,   +2,…,+10

    0.4

    -0.8, -0.4,  0,  +0.4, +0.8

    G24

    1.2(48)

    2

    -12,…,-2,    0,   +2,…,+12

    0.4

    -0.8, -0.4,  0,  +0.4, +0.8

    G28

    1.4(55)

    2

    -12,…,-2,    0,   +2,…,+12

    0.4

    -0.8, -0.4,  0,  +0.4, +0.8

    G40

    2.0(80)

    4

    -16,…,-4,    0,   +4,…,+16

    0.8

    -1.6, -0.8,  0,  +0.8, +1.6

    G60

    3.0(120)

    6

    -18,…,-6,    0,   +6,…,+18

    1.2

    -2.4, -1.2,  0,  +1.2, +2.4

    G100

    5.0(200)

    10

    -40,…,-10,  0,   +10,…,+40

    2

    -4, -2,  0,  +2, +4

    G200

    10(400)

    15

    -60,…,-15,  0,   +15,…,+60

    3

    -6, -3,  0,  +3, +6

  • bearing balls size

    Size (inch) Size (mm) Size (inch) Size (mm)

    1.5 1/16 " 1.588

    2 3/32 2.381
    1/8 " 3.175 5/32 " 3.969
    3/16 " 4.763 7/32 " 5.556
    1/4 " 6.35 17/64 " 6.747

    7 9/32 " 7.144
    5/16 " 7.938 11/32 " 8.731
    3/8 " 9.525 13/32 " 10.319
    7/16 " 11.112 29/64 " 11.509
    15/32 " 11.906
    12
    31/64 " 12.303 1/2 " 12.7
    17/32 " 13.494
    14
    9/16 " 14.288 19/32 " 15.081
    5/8 " 15.875 21/32 " 16.669
    11/16 " 17.463 23/32 " 18.256
    3/4 " 19.05 25/32 " 19.844

    20 13/16 " 20.638
    7/8 " 22.225 15/16 " 23.812
    1 " 25.4 1-1/16 " 26.988
    1-1/8 " 28.575 2001/3/16 30.163
    1-1/4 " 31.75 1-3/8 " 34.925

    35 1-1/2 " 38.1
    1-5/8 " 41.275 1-11/16 " 42.863
    1-7/8 " 47.625 2 " 50.8
  • Our Services

    1. Full technical support from concept design to final product delivery

    2. On-time delivery with no compromise on quality

    3. High-quality product making with advanced equipment and techniques

    4. Large-scale of proudction availabl

    5. Lower cost (meadium-size factory, 3000 square meters), but high-end quality only(the
    same quality control system as per big factory)  

     6. Any questions to be sent will get response within 24 hours

  • FAQ

     a) How to prolong service life of bearings?

    Accurate installation and using,alignment,timely monitor,re lubrication etc.

    b) Reason for bearings failure?

    Usually is incorrect using method,pollution,improper use of lubricant,damage happened
    in installation and handing,also including installation error.according to the traces can
    know the reason why is failure.

    c) How to choose bearings?

    Analyse mechanical device and use conditions.clear the requiremment of
    bearings.select type of bearings,select distribution way of bearings.selet dimensions of
    bearings,select installation method of bearings.

    d) When select bearings specifications,what you need to consider?

    The precision of the bearings(rotating precision,dimensional tolerances)internal
    clearance and preload bearing material and heat treatment.structure of cage and material.

    e) Payment method,packing way,transport method,time of delivery?      T/T,PAYPAL,WESTERN UNION,L/C     Tube,box,carton,pallet,     By sea,by air       3-15days after receipt of payment.

Online Inquiry

Please feel free to give your inquiry in the form below.We will reply you in 24 hours.

return