English Español
Language:English
Full Ceramic Zirconia Ball Bearing
  • ceramic zro2 thrust ball bearing
  • ceramic zro2 thrust ball bearing
  • ceramic zro2 thrust ball bearing
  • ceramic zro2 thrust ball bearing
  • ceramic zro2 thrust ball bearing
  • ceramic zro2 thrust ball bearing
  • ceramic zro2 thrust ball bearing
  • ceramic zro2 thrust ball bearing

ceramic zro2 thrust ball bearing

  • Description:
  • Thrust ball bearings from the seat , shaft ring and ball cage assembly of three parts .

  • Contact Now
  • Facebook Twitter Google+ LinkedIn Email Addthis
  • Description
  • Product list
  • Our Services
  • FAQ
  • Product parameters

    Category:

    ZrO2 Bearing

    Color:

    white

    Bearing No.:

    Zro2 thrust ball bearing

    Bearing material-Rolling element material:

    ZrO2

    Race Type:

    Non

    Bearing material-Bearing cage material:

    ZrO2

    Seal Type:

    OPEN

    Bearing material-Sealing members material:

    ZrO2

    Bearing precision grade:

    P0

    Rated load-dynamic load:(KN)

    PTFE

    Internal clearance:

    C0

    Type of lubricant:

    Non

    Payment terms:

    L/C  D/A D/P T/T western Union MoneyGram Paypal

    Delivery :

    4-9 days if have stock, 9-30 days after order confirmed(depend on the total amount)

    shipping

    By Express,By Air,By Sea

    Product Feature
    With cold, wear, corrosion resistance, anti-magnetic insulation, self-lubricating, high-speed and other features.
    Applications
    Food processing machinery, medical equipment, cryogenic engineering, optics, printing machinery,etc.

    Product Details
    Thrust ball bearings from the seat , shaft ring and ball cage assembly of three parts . And the shaft with the axis of said ring, and the shell with said seat.
    Thrust ball bearings can withstand axial load . Thrust ball bearings can withstand axial load. Thrust ball bearings , which ring with the shaft . Appear before the installation of seat spherical bearings, aligning performance , can reduce installation errors. Thrust ball bearings can bear radial load , lower speed limit.
    Features:
    With one-way , two-way two types.
    2 In order to allow the installation error , whether it is one-way or two-way , you can choose spherical self-aligning spherical saddle -type or spherical seat type .
    3 height grease technology - NSK grease lubricant technology can extend the life and improve bearing performance
    4 high-grade steel ball - quiet and smooth high-speed rotation
    5 Use the options in the ring, may allow the installation error .
    Applies only to withstand side of the axial load, the speed on the lower parts , such as crane hooks , vertical pumps, vertical centrifuge , jack, speed reducer and so on. Shaft bearing ring , seat ring and rolling elements are separated, you can dismantle respectively .
    Thrust ball bearing assembly has two key points . A cage and the ball is laminated quality control, the other is the nominal bearing after assembly height T control . In addition, since the shaft ring, seat ring can be separated , bring a management issues . Is to prevent the import of bearing parts mixed . M-type stamping cage assembly using crimping die . After pressing the ball in the pocket hole required rotation flexibility , but can not fall from the pockets and technical procedures check balls in the pocket bore runout . Solid cage stamping presses too small will make the ball runout and embossed with raised portions connecting the cage is too small and not strong enough , prone to block out phenomenon, resulting cage scrapped. Small thrust ball bearing race ring and the shaft diameter size difference is small , there is no obvious difference between the two sets of groups . In order to prevent the emergence of the phenomenon of mixed units , namely a set of bearings fitted into a set of difficulties are occurring Tao seat or are shaft washer situation. This need to take certain measures . Usually set when combined with auxiliary tooling would draw ring, seat regiment distinguished , or sampling nominal height diameter plug before checking with diameter size , in order to check the diameter of convenience, put the following races , placed above the shaft ring . If the diameter of a clear seat Court oxidized color quenching or without grinding , inner diameter of the test is not necessary , can obviously be seen that axis and the seat ring due to the difference , easy to mix sets. Thrust ball bearing assembly to be right after the nominal height T measurements confirm a hundred qualified. When measured with a high degree of alignment blocks or standard difficult pieces , and be measured load bearing rotation if need ten times , be sure to meet the minimum height . When the thrust ball bearing is operating at high speed , the ball and raceway contact angle of the radial plane will be affected by centrifugal force , thereby causing the ball slide relative to the raceway . This sliding adhesive wear caused by damage to bearings . To prevent such damage , must ensure that the minimum thrust ball bearings under load, as shown in Equation 1 or Equation 2 , whichever is the greater of the calculated value . .
    Equation 1: Famin = K · n * n    Equation 2: Famin = Coa/1000   Famin: minimum axial load (N)
    K: Minimum axial load factor     n: Speed ​​( per minute )    Coa: Basic static load rating (N)

    Thrust ball bearings can only bear a load direction , if withstand the loads in both directions , you must use two-way thrust ball bearings. Thrust ball bearings must be applied minimum load or preload . When the axis perpendicular to the axis of weight usually exceeds the minimum load . At this time the opposite direction of the axial external load , which is possible to reduce the load acting .

  • Our Services 

    1. Full technical support from concept design to final product delivery 

    2. On-time delivery with no compromise on quality 

    3. High-quality product making with advanced equipment and techniques 

    4. Large-scale of proudction availabl 

    5. Lower cost (medium-size factory, 3000 square meters), but high-end quality only(the 
    same quality control system as per big factory)  

     6. Any questions to be sent will get response within 24 hours FAQ

  • FAQ

     a) How to prolong service life of bearings? 

    Accurate installation and using,alignment,timely monitor,re lubrication etc.

    b) Reason for bearings failure? 

    Usually is incorrect using method,pollution,improper use of lubricant,damage happened 
    in installation and handing,also including installation error.according to the traces can 
    know the reason why is failure.

    c) How to choose bearings? 

    Analyse mechanical device and use conditions.clear the requiremment of 
    bearings.select type of bearings,select distribution way of bearings.selet dimensions of 
    bearings,select installation method of bearings.

    d) When select bearings specifications,what you need to consider? 

    The precision of the bearings(rotating precision,dimensional tolerances)internal 
    clearance and preload bearing material and heat treatment.structure of cage and material. 

    e) Payment method,packing way,transport method,time of delivery?      T/T,PAYPAL,WESTERN UNION,L/C     Tube,box,carton,pallet,     By sea,by air       3-15days after receipt of payment.

Online Inquiry

Please feel free to give your inquiry in the form below.We will reply you in 24 hours.

return